Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
Entries 1 to 200. Total of 20636 entries found.
No.Description 
100000001600L, Tube, Polyprop, 17 mm x 130 mm, 1000/pk [Tube] 
20023-200, Interface cable for 4100 ExoScan FTIR Y Interface [Interface] 
3009-1075, DB-5, 60m, 1.5um, with 0.5m deact [DB-5] 
40100-0050, Cap, 1/16inch stainless steel [Cap] 
50100-0053, Stainless Nut 1/16 in [Stainless] 
60100-0057, Nut, Hex 1/8-27 [Nut] 
70100-0058, Nut 1/8inch Tubing Brass [Nut] 
80100-0071, Plug, 1/8inch, Stainless [Plug] 
90100-0073, 1/8in SST Tube with 1/16in Reducer [1/8in] 
100100-0088, Tee, 1/4 inch, brass [Tee] 
110100-0089, Tee, .250 tubing [1/4inch] 
120100-0090, Tee, 1/8 inch Brass [Tee] 
130100-0091, Union elbow, 1/8inch brass [Union] 
140100-0092, Elbow 1/8inch Stainless [Elbow] 
150100-0110, 1/8inch Male Connector, Brass [1/8inch] 
160100-0111, 1/8inch Male Connector, 316 SST [1/8inch] 
170100-0118, 1/8inch x 1/4inc brass tubing connector [1/8inch] 
180100-0119, 1/4inch x 1/4inch brass tubing connector [1/4inch] 
190100-0121, 1/8 x 1/4 stainless steel reducing union [1/8] 
200100-0124, Union SS 1/16inch tubing [Union] 
210100-0126, Union, tubing 1/8inch [Fitting-Union] 
220100-0128, Union, tubing 1/4inch [Union] 
230100-0132, Union, bulkhead 1/8inch [Union] 
240100-0133, 1/8inch Bulkhead Union, 316 SST [1/8inch] 
250100-0161, 1/8 Union Cross Brass [1/8] 
260100-0208, 1/4 inch Male Connector,Brass [1/4] 
270100-0241, Union, 1/8 - 1/16 Reducing Union [Union] 
280100-0420, Adapter, 1/8inch - 1/8inch Brass [Adapter] 
290100-0542, TEE, 1/8 SS [TEE] 
300100-0549, NW 20/25 Clamping Ring [NW] 
310100-0680, Tee, 1/16 inch, brass [Tee] 
320100-0782, Tee, 1/16 inch SS Tube OD [Tee] 
330100-0900, Union, 1/16in. SS zero dead volume [Union] 
340100-0929, Nut, Male 1/16inch [Nut] 
350100-0969, 1/16inch Tee, 316 SST, Low Dead Volume [1/16inch] 
360100-0985, CROSS, BRASS [CROSS] 
370100-0996, CROSS, 1/8" Stainless Steel [CROSS] 
380100-1107, 1/8 id Front Ferrule Graph Vespel, 10PK [1/8] 
390100-1189, Connector, Male 1/8 x 1/4 [Connector] 
400100-1224, Flow cell UV 10mm 30uL round ap. 1/pk. Quartz flo [0100-1224] 
410100-1225, Flow cell UV 10mm 80uL round ap. 1/pk. Quartz flo [Flow] 
420100-1315, Plug, 1/16in, SS [Plug] 
430100-1316, Union, 1/16inch Brass [Union] 
440100-1324, Ferrule, 1/4'' GPH 10/PK [Ferrule] 
450100-1325, Ferrule, 1/8'' GPH 10/PK [Ferrule] 
460100-1326, Ferrule, 1/16inch GPH 10/PK [Ferrule] 
470100-1327, Ferrule, 1/4'' vespel 10/PK [Ferrule] 
480100-1328, Ferrule, 1/8'' Vespel 10/PK [Ferrule] 
490100-1329, Ferrule, 1/16'' Vespel 10/PK [FTG-Ferrule] 
500100-1331, Ferl 1/4 inch VG-1 15pct graphite 10/PK [Ferl] 
510100-1332, Ferrule, 1/8'' 10/PK [Ferrule] 
520100-1333, Ferrule, 1/16inch 10/PK [Ferrule] 
530100-1342, Ferrule, 1/8'' to 1/16'' Vespel 10/PK [Ferrule] 
540100-1344, Ferrule, 1/8 to 1/16 reducer 10/PK [Ferrule] 
550100-1365, Ferrules, PTFE 1/8inch [Ferrules] 
560100-1372, Ferrules, 1/8'' No hole 10/PK [Ferrules] 
570100-1375, Ferrules, 1/16'' PTFE 10/PK [Ferrules] 
580100-1378, Ferrules, PTFE 1/4inch 10/PK [Ferrules] 
590100-1379, Ferrules, VG-2 1/16'' 10/PK [Ferrules] 
600100-1381, Ferrules, 1/16'' to 0.4mm VG-2 10/PK [Ferrules] 
610100-1383, Ferrules, 1/16'' to 0.8mm 10/PK Vespel, 40 [Ferrules] 
620100-1389, Ferrule,PTFE for COC syringe 9301-0658 [Ferrule] 
630100-1490, 1/16inch Ferrule set SST [1/16inch] 
640100-1511, Nut-Counter Bore, 1/16 in. [Nut-Counter] 
650100-1512, Ferrule, polymide 1/16 in. [Ferrule] 
660100-1513, Liner, polyimide 0.53mm column to W-Series valves [Liner] 
670100-1514, Liner, polyimide 0.32mm column to W-Series valves [Liner] 
680100-1515, Bulkhead union, 1/16''-1/16'' [Bulkhead] 
690100-1516, Fingertight fitting [Fitting-Fingertight] 
700100-1527, Bulkhead union .320 [Bulkhead] 
710100-1597, NW20/25 Co-Seal [NW20/25] 
720100-1619, Union U-435 1 ea [Union] 
730100-1631, Rheflex fittings, 5/PK [Fitting-Tube] 
740100-1710, Mounting tool for flangeless nut [Mounting] 
750100-1847, PEEK adapter 1/4-28 to 10-32 [Fitting-Adapter] 
760100-1849, Rotor seal, Tefzel for G1313 [Rotor] 
770100-1850, Stator for 0101-0921 valve [Stator] 
780100-1851, Stator face assy for 0101-0921 valve [Stator] 
790100-1852, Isolation seal for 0101-0921 valve [Isolation] 
800100-1853, Rotor seal, Vespel [Rotor] 
810100-1854, Rotor seal-Tefzel for 0101-0921 valve [Rotor] 
820100-1855, Rotor seal-Vespel for 0101-0921 valve [Rotor] 
830100-1859, Stator face assy for 5063-6502 valve [Stator] 
840100-1860, Stator for G1328A manual injector [Stator] 
850100-1921, Sample loop, 100ul [Sample] 
860100-1922, Sample Loop, 20ul [Sample] 
870100-1923, Sample Loop, 10ul [Sample] 
880100-1924, Sample Loop, 50ul [Sample] 
890100-2087, Rotor seal, Vespel, 3-grooves for u-LC For use wi [Rotor] 
900100-2088, Rotor seal, Vespel, 2-grooves for u-LC For use wi [Rotor] 
910100-2089, Stator for u-LC valves, special hardened [Stator] 
920100-2138, Ferrule One Piece Fused Silica Adapter [Ferrule] 
930100-2144, 1/8inch Ball Valve [1/8inch] 
940100-2175, Rheflex fittings, PEEK, color 10/PK [Rheflex] 
950100-2195, Stator head for 0101-1267 valve [Stator] 
960100-2231, Rotor seal, PEEK, 2-groove for 0101-0921 [Rotor] 
970100-2233, Rotor seal, PEEK, 3-groove for 0101-0920 [Rotor] 
980100-2298, Adapter, PEEK int. 1/4-28 to ext. 10-32 [Adapter] 
990100-2323, Polymide Liner for 250 um columns [Polymide] 
1000100-2410, Union, PEEK for 1/8'' od tubing [Union] 
1010100-2415, Seal-Rotor-Vespel 5-Groove 0.65in OD [Seal-Rotor-Vespel] 
1020100-2441, ZDV union, PEEK, with Fittings ZDV union, PEEK, w [ZDV] 
1030100-2583, Gas connector for Dilution gas port, 1/pk. For di [Gas] 
1040100-2594, Fitting-internal Reducer 1/16 to 1/32-in [Fitting-internal] 
1050100-2595, Polymide ferrule,5/pk,0.50mm,0.80mm [Polymide] 
1060100-2637, SS Nut and Ferrule 1/8in for sw.valve [SS] 
1070100-2703, Gas connector, dilution gas port, 7900 1/pk. Suit [Gas] 
1080101-0030, Soap Film Flow Meter 10ml [Soap] 
1090101-0113, Flowmeter 100ml [Flowmeter] 
1100101-0282, Sample loop 500ul [Sample] 
1110101-0299, Sample loop 1ml [Sample] 
1120101-0300, Sample loop 2ml [Sample] 
1130101-0301, Sample loop 5cc volume [|Sample] 
1140101-0302, Sample loop 10cc volume [|Sample] 
1150101-0303, Sample loop .250cc [Sample] 
1160101-0304, Sample loop, 25uL [Sample] 
1170101-0355, Straight metering valve 1/16'' [Valve-Metering] 
1180101-0376, LOOP, 10 UL [LOOP] 
1190101-0377, LOOP, 20 UL [LOOP] 
1200101-0378, LOOP, 50 UL [LOOP] 
1210101-0379, LOOP, 100 UL [LOOP] 
1220101-0403, VALVE, METERING [VALVE] 
1230101-0532, 7um filter/holder assembly [7um] 
1240101-0584, Valve, 6P GC [Valve] 
1250101-0585, Valve, 10P GC [Valve] 
1260101-0594, Splitter, 1:1 ratio [Splitter] 
1270101-0595, Splitter, 10:1 ratio [Splitter] 
1280101-0620, Rotor seal Tefzel [Rotor] 
1290101-0623, Rotor seal, Vespel for manual injector [Rotor] 
1300101-0624, Stator face assembly for Rheodyne 7125 [Stator] 
1310101-0626, Rotor seal, Vespel for autosampler [Rotor] 
1320101-0633, 1/16inch Micrometering Valve [1/16inch] 
1330101-0636, Liquid sampling 0.2ul, 1000psi Max temperature 17 [Liquid] 
1340101-0637, Liquid sampling 0.5ul, 1000psi Max temperature 17 [Liquid] 
1350101-0638, Liquid sampling 1.0ul, 1000 psi Max temperature 1 [Liquid] 
1360101-0639, Liquid sampling valve 0.5ul, 5000PSI Maximum temp [Liquid] 
1370101-0666, Sample loop,100ul [Sample] 
1380101-0921, G1313 injection valve assembly [G1313] 
1390101-0946, 4-port replacement valve WE series, 400 psi, 225 [4-port] 
1400101-0947, 4-port valve WT series, 300 psi, 350C 4-port repl [4-port] 
1410101-0954, Nickel Sample Loop, 1.0mL [|Nickel] 
1420101-0955, 2.0ml Nickel Loop 1/16inch valve gas sample loop [|2.0ml] 
1430101-0956, Nickel sample loop, 0.25mL [|Nickel] 
1440101-0957, Nickel sample loop, 0.50mL [|Nickel] 
1450101-1001, Reducing Filter [Reducing] 
1460101-1219, 1ml sample loop, SS [1ml] 
1470101-1226, Sample loop, PEEK, 20ml [Sample] 
1480101-1227, Sample loop, PEEK, 10ml [Sample] 
1490101-1228, Sample loop, PEEK, 5ml (3725) [Sample] 
1500101-1229, Sample loop, PEEK, 2ml (3725) [Sample] 
1510101-1230, Sample loop, PEEK, 5ml [Sample] 
1520101-1231, Manual prep injection valve, PEEK (3725i), with p [Manual] 
1530101-1232, Manual prep injection valve, SS (3725i-038), with [|Manual] 
1540101-1233, Rotor seal, PEEK, for 3725/3725-038 [Rotor] 
1550101-1234, Sample loop, PEEK, 2ml [Sample] 
1560101-1235, Sample loop, PEEK, 1ml [Sample] 
1570101-1236, Sample loop, PEEK, 500ul [Sample] 
1580101-1237, Sample loop, PEEK, 200ul [Sample] 
1590101-1238, Sample loop, PEEK, 50ul [Sample] 
1600101-1239, Sample loop, PEEK, 20ul [Sample] 
1610101-1240, Sample loop, PEEK, 10ul [Sample] 
1620101-1241, Sample loop, PEEK, 5ul [Sample] 
1630101-1242, Sample loop, PEEK, 100ul [Sample] 
1640101-1243, Sample loop, SS, 5ml (7725) [|Sample] 
1650101-1244, Smple loop, SS, 2ml (7725) [Sample] 
1660101-1245, Sample loop, SS, 1ml [Sample] 
1670101-1246, Sample loop, SS, 500ul (7725) [Sample] 
1680101-1247, Sample loop, SS, 200ul (7725) [Sample] 
1690101-1248, Sample loop, SS, 5ul [Sample] 
1700101-1249, Sample loop, SS, 5ml (7125/7010) [Sample] 
1710101-1250, Sample loop, SS, 2ml (7125/7010) [Sample] 
1720101-1251, Sample loop, SS, 500ul (7125/7010) [Sample] 
1730101-1252, Sample loop, SS, 200ul (7125/7010) [0101-1252] 
1740101-1253, Manual injection valve PEEK, (9725i) with positio [Manual] 
1750101-1254, Rebuild kit for 7725 Series Includes: rotor seal, [Rhebuild] 
1760101-1255, Rotor Seal PEEK, for 7125,7125i [Rotor] 
1770101-1257, Rhebuild kit for 7750-020 valve Includes: 2-groov [Rebuild] 
1780101-1258, Rhebuild kit for 7750-030 valve Includes: 3-groov [Rebuild] 
1790101-1268, PEEK rotor seal and stator face [PEEK] 
1800101-1288, Rebuild kit, G1160A Stream select valve [Rebuild] 
1810101-1290, Rebuild kit, G1159A column select valve [Rebuild] 
1820101-1358, Rebuild kit [Maintenance] 
1830101-1359, Rebuild kit G1157A column regen valve [Rebuild] 
1840101-1360, Rebuild Kit [Rebuild] 
1850101-1361, Rotor seal, Vespel for 0101-1343 [Rotor] 
1860101-1362, Stator 2 pos/10 port dual-sided MBB [Stator] 
1870101-1385, 10 port valve for G2258A Dual Loop ALS with DuraL [10] 
1880101-1390, Stator, DuraLife, 10 port valve [Stator] 
1890101-1398, Gas regulator, Helium, High purity stainless stee [Gas] 
1900101-1399, Gas regulator, Hydrogen, High purity stainless st [Gas] 
1910101-1400, Gas regulator, Argon, High purity stainless steel [Gas] 
1920101-1409, Rotor seal, 3 grooves, max 600 bar for TCC switch [Rotor] 
1930101-1411, Rotor seal,single groove for 6 position 7 port se [Rotor] 
1940101-1415, Rotor seal,5 grooves,max 600 bar for TCC micro sw [Rotor] 
1950101-1416, Rotor seal,3 grooves,max 600 bar for injection va [Rotor] 
1960101-1417, Stator for 6 port switch valve, 600 bar used with [Stator] 
1970101-1421, Stator 10 port micro valve max 600 bar for TCC mi [Stator] 
1980101-1422, Injection valve,max 600 bar 2pos/6port for 1200 S [Injection] 
1990101-1472, 14-port replacement valve UWE series, Hastelloy C [14-port] 
2000101-1473, 14-port replacement valve UWE series, 400 psi, 22 [14-port] 

Follow us

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.

Privacy Statement - Disclaimer - Terms & Conditions