Microprocessor-Controlled Multi-Channel Dispensing Pumps IPC (N)
ISMATEC
For precision applications, including analytical and nutrient media dispensing for cell cultures.
- Microprocessor controlled.
- Very accurate pumping
- With stand-by mode (prevents the tubing system from drying out, e. g. over night).
- With calibrating and dispensing function.
- Flow rate range 0.0004 to 44 ml / min (per channel).
- 4, 8, 12, 16 or 24 channels.
- 8 actively driven stainless steel rollers.
- Very low pulsing.
- Membrane key-pad and LED display.
- Click'n go cassettes with automatic pressure setting.
- Each channel can take various tubing sizes.
- 2-stop colour-coded tubing.
- Differential pressure 1.0 bar, depending on tubing material. Tubing with small inner-Ø and / or cassettes with pressure lever may enable higher pressures.
Programmable functions:- ml / min.
- Speed drive.
- Dripfree due to roller backsteps.
- Calibratable: ml / min (flow rate), ml (volume).
- Drive start / stop.
Technical data: | |
Motor type: | DC-Motor |
Speed IPC: | 0.4 to 45 min-1 |
Speed IPC-N: | 0.11 to 11.25 min-1 |
Speed setting: | 1 to 100 %, resolution 0.1 % |
Flow rate setting: | µl / min or ml / min |
Power consumption: | 40 W |
Mains supply: | 230 V / 50 Hz , 115 V / 60 Hz |
Protection class: | IP 30 |
Speed adjustment: | digital |
Breite: | 175.00 mm |
Höhe: | 130.00 mm |
Netzanschluss: | no indication |
Schutzklasse: | [_18/4_] |