Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
 
Reach-In CO2 Incubator (Optionally with UV)
Panasonic


PHCbi
Creating successful cell cultures requires an incubator that has a high level of precision and security and is easy to use. IncuSafe offers a variety of cell culture incubators that use advanced technology for unique temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, extremely reliability and efficiency.
  • inCu-saFe® interior (proactive contamination control, with copper enriched st. steel alloy). Combines the germicidal properties of copper and the corrosion resistance of st. steel.
  • SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tub without damaging the cell cultures.
  • H2O2 decontamination technology: the unique high-speed decontamination system from PHCbi, uses gaseous H2O2 and enables time-saving and documented decontamination in the chamber with a high level of security. Electronic door lock, which the chamber locks automatically during the decontamination phase.
  • Dual hot air sterilisation (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilisation cycle (model: MCO-170AICUVD-PE).
  • Long-term good performance, optimal cell viability and successful tries. In addition, precise regulation of the CO2 concentration and temperature with simple operation and maintenance.
  • Patented DHA direct heating and air jacket system*: high-precision temperature control for further temperature constancy and fast temperature recovery times after opening the door.
  • Fast CO2 recovery times: with the PID controller and the dual infrared sensor achieves an ultra-fast CO2 recovery time without overheating. Even after opening the door several times.
  • The unique solid-state O2 zirconium oxide sensor in the multi-gas incubators enables precise regulation of physiological oxygen concentrations to simulate in vivo conditions.
  • Condensation regulation: this prevents undesired condensation in the chamber and possible contamination avoided.
  • Intuitive usability, simple control and clear display. Optical / acoustic temperature, door opening and power failure alarm. Connection options for remote alarm.
  • Exceptionally low CO2 consumption.
  • Silent operation.
  • 1 outer door (door with double-sided hinge, can be changed on site), 1 inner door, gas-tight, made of tempered glass*, 4 internal doors, gas-tight, made of tempered glass (for multi-gas incubators).
  • Shelves (inCu-saFe®, copper-enriched st. steel alloy).
  • Gehäusedurchführung (Standard).

Max. product safety*
Certified as a class IIa medical device (93/42 / EEC and 2007/47 / EU) for medical purposes for the storage of cells, tissues, organs and embryos.

Optional accessories:
H2O2 steam generator, H2O2 reagent bottle (1 set = 6-pack), multiple interior doors, CO2 gas pressure regulator, automatic CO2 bottle change system, inCu-saFe® shelf, inCu-saFe® half carrier system, stacking plate for placing two devices on top of each other, roller base.
Technical Data:
Temperature range:5 °C above ambient temperature up to 50 °C
Temperature control range and fluctuation:ambient temperature + 5 to + 50 °C, ± 0.1 °C
Temperature stability:± 0.25 °C (ambient temperature + 25 ºC, settings + 37 °C, CO2 5 %, no load) / ± 0.50 °C for MCO-80IC-PE
CO2 control range and fluctuation:0 to 20 %, ± 0.15 %
O2 control range and fluctuation:1 to 18 % and 22 to 80 %, ± 0.20 %
Humidity level and fluctuation:95 % RH, ± 5 %
Mains supply:230 V, 50 Hz
Outer height~[mm]:2040.00
Innenbreite:806.00 mm
Innentiefe:693.00 mm
Innenhöhe:1524.00 mm
Gewicht:275.00 kg
Handle:no indication
Netzanschluss:no indication
Type:MCO-80IC
Reach-In CO2 Incubator (Optionally with UV)  Panasonic
Reach-In CO2 Incubator (Optionally with UV)  Panasonic
Reach-In CO2 Incubator (Optionally with UV)  Panasonic
TypeklappbarInterior materialOuter width [mm]Outer depth [mm]PUOrder No.CDCPrice/Unit/EUR 
MCO-80IC851.00copper st. steel alloy986.00853.0015437018123,221.66Order
Accessories:
Validation tests of laboratory devices / OMNILAB-LABORZENTRUM

Follow us

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.