Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
 
Refrigerated and Heating Circulators HRC 2 basic / control
IKA


The compact refrigerated and heating circulators are renowned for its high energy efficiency, a working temperature powerful infinitely range from - 20 resp. - 30 to + 100 °C and a variable pressure and suction pump. The on-demand and speed-controlled compressor reduces noise and operating costs.

The high-quality Isolation of the 4 l bath allows fast heating and reduces heat input when cooling. Using the external temperature control circuit is possible for up to 2.5 l thermofluid without a refill.

The integrated hopper and drain valve ensure a safe and clean handling of the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unitás air filter.There is a drain valve on the front side of the bath. A hose can be connected to empty the bath, so the user does not get in direct contact with the thermofluid.
  • Speed-controlled refrigeration system with 400 W cooling capacity.
  • Speed-controlled pump make of PEEK: (0.5 bar; 22 l / min).
  • 1500 W heating capacity (1200 W @115V).
  • Digital level indicator.
  • Safety classification III (FL) acc. to DIN 12876.
  • Adjustable temperature safety circuit.
  • RS 232 and USB interfaces.

Additionally with HRC 2 control:
The HRC 2 control in combination with an external temperature sensor is perfectly suitable to precisely temper external closed or open applications.

With the Wireless Controller (Wico) the HRC 2 control can be operated safely and conveniently everywhere. Processes can be automated and simplified through 10 freely programmable temperature ramps with each 10 steps.
  • Operating mode D (confirmation mode).
  • Signal if set point is reached.
  • Timer / counter.
  • Outgassing function for labreactors.
  • Adjustable temperature safety circuit.
  • Connection socket for external PT 100 temperature sensor (accessory: PT100.30; Lemo connector).
  • Connection of magnetic valves possible (Mulit IO).
  • Alarm contact (Multi IO).
  • Connector for standby contact input (Multi IO).
Technical Data:
Heat output:
Cooling capacity at + 20 / + 10 / 0 / - 10 / - 20 °C:
1500 W
400 / 370 / 320 / 240 / 130 W
Working temperature range:- 20 to 100 °C
Permissible ambient temperature:5 to 32 °C
Permissible relative humidity:80 %
Temperature stability DIN 12876:± 0.1 K
Pump pressure (0 l discharge flow):max. 0.5 bar
Pump pressure suction side (0 l flow):max. 0.25 bar
Flow rate max. (0 bar back pressure):
Pump connection:
max. 21 l / min
M16x1
Cooling agent:R134a
Protection class acc. to DIN EN 60529:IP 21
Mains supply:230 / 115 V, 50 / 60 Hz
Bath capacity~l1.4 to 4.0
Refrigerated and Heating Circulators HRC 2 basic / control  IKA
TypeWorking temperature range °CPUOrder No.CDCPrice/Unit/EUR 
HRC 2 basic- 20 bis + 1001544843813,950.00Order
HRC 2 control- 30 bis + 1001544843915,259.00Order

Volg ons

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.