Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
OMNILAB-LABORZENTRUM  
Validation Tests of Laboratory Devices
OMNILAB-LABORZENTRUM


Each test incl. a copy of the test / measurement protocol and the attachment of a test badge.

Safety workbenches (MSW):
Visual inspection for defects, visualisation of the air flow, inspection of the absence of leaks in the pre-, exhaust- and circulating air filters with laser particle measuring device and aerosol generator (DOP / DEHS test), inspection and if necessary adjustment of the air intake speed and displacement flow by means of anemometer with possible readjustment, electrical test acc. to BGV-A3.

Workbenches for product protection (PSW):
Visual inspection for defects, visualisation of the air flow, checking that the HEPA filter is free of leaks with laser particle measuring device and aerosol generator (DOP / DEHS test), checking and, if necessary, adjustment of the displacement flow by means of anemometer with possible readjustment, electrical test acc. to BGV-A3.

Autoclaves / steam sterilisers:
Functional test of the equipment parts required for the safety of operation, in particular measuring instruments, safety devices, shut-off devices, seals and closures; internal visual inspection of the pressure vessel for damage to the walls and visual inspection of the general condition, electrical safety test acc. to BGV-A3, recording of pressure and temperature via calibrated data logger with test run.

Centrifuges:
Check housing for stability and check of mechanical fastening, frame and auxiliary units; check housing lids, covers and claddings for corrosion, erosion and damage due to mechanical stress; check of cover locking and closing, condition and fastening of the vibrating foundation; check of drive condition, check of drum or rotors for marking, condition, corrosion, erosion and grinding marks; measurement of rotational speed; check of electrical equipment acc. to BGV-A3.

Fume cupboards (class 1 personal protection):
Visual inspection for defects, checking and determining the air intake velocity and volume flow with calibrated measuring equipment, functional test of the control panel + monitoring device, checking the alarm, sash + seals, electrical test acc. to BGV-A3.*.

Safety / hazardous material cabinets:
Functional test of the equipment parts required for operation, functional test of the complete mechanical system, internal visual inspection of the hazardous substances cabinet, inspection of the door seal, visual inspection of the general condition, legal security check, fire protection test, ventilation test and determination of the air volume per hour with calibrated measuring technology (if the safety device is connected to the exhaust air - in compliance with the regulations).*

Spot extraction:
Visual inspection for defects, inspection and determination of the air intake velocity and air volume per hour with calibrated measuring technology, functional test of the control panel and monitoring device, check of the alarm, seals, electrical test acc. to VDE 0701/0702.*.

CO2 incubators:
Functional test of the equipment necessary for the operation of the incubator, measuring instruments and closing devices, internal visual inspection of the incubator, inspection of the door seal, closure, V-pump (if integrated), filters and gas flush valves, visual inspection of the general condition, electrical test acc. to BGV-A3, determination of the CO2 content, recording of the temperature via calibrated sensor.

Drying ovens:
Functional test of the equipment necessary for the operation of the required equipment, in particular measuring devices and closing devices, internal visual inspection of the incubator, inspection of the door seal, closure, V-pump (if integrated), filter and exhaust air, visual inspection of the general condition, electrical test acc. to BGV-A3, recording of the temperature + humidity via calibrated sensor with printout on protocol.
Centrifuge categories:
Performance class I.1:micro centrifuges without cooling
e. g.: Sigma 1-16, Eppendorf 5429
Performance class I.2:micro centrifuges with cooling, small table-top centrifuges
e. g.: Biofuge Stratos, Sigma 3-16
Performance class II.1:small table-top centrifuges
with cooling, universal centrifuges
e. g.: Multifuge X3, Sigma 3-30K
Performance class II.2:large table-top centrifuges, small floor standing centrifuges
e. g.: Multifuge X3R, Variofuge 3-R, Sigma 6-16K
Performance class III.1:floor standing centrifuges, highspeed
< 25000 x g
e. g.: Sigma 8K
Performance class III.2:floor standing centrifuges, superspeed (not ultra)
< 80000 x g
e. g.: Sorvall RC6+
Validation Tests of Laboratory Devices  OMNILAB-LABORZENTRUM
Validation Tests of Laboratory Devices  OMNILAB-LABORZENTRUM
Validation Tests of Laboratory Devices  OMNILAB-LABORZENTRUM
Validation check ofDescriptionPUOrder No.CDCPrice/Unit/EUR 
Safety cabinetstest acc. to EN 124691700011001on demand 
Product protection cabinetstest acc. to VDI 20831700011101on demand 
Autoclaves-1700012001on demand 
Culture media preparer-1700012101on demand 
Centrifuges performance class I.1test acc. to DGUV 100-500 chapter 2.11. part 31700013001on demand 
Centrifuges performance class I.2test acc. to DGUV 100-500 chapter 2.11. part 31700013101on demand 
Centrifuges performance class II.1test acc. to DGUV 100-500 chapter 2.11. part 31700013201on demand 
Centrifuges performance class II.2test acc. to DGUV 100-500 chapter 2.11. part 31700013301on demand 
Centrifuges performance class III.1test acc. to DGUV 100-500 chapter 2.11. part 31700013401on demand 
Centrifuges performance class III.2test acc. to DGUV 100-500 chapter 2.11. part 31700013501on demand 
Fume cupboards (class 1 personnel protection)test acc. to DIN 12924 resp. EN 141751700014001on demand 
Source / point extraction-1700014101on demand 
Cabinets for hazardous substances / acids / alkalitest acc. to EN 144701700015001on demand 
Incubators and drying cabinets-1700016001on demand 
CO2 incubators / drying cabinets-1700016101on demand 
Moisture analysers (without temp.)-1700017401on demand 

Follow us

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.