Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
Shopping Basket| Catalogue | > | Laboratory Equipment & Appliances | > | Special Applications | > | Evaporators | > | Accessories for Evaporators |
 |
Hei-VAC Control
Heidolph
Heidolph
Intelligent evaporation with Heidolph rotary evaporators
Overheat protection design that prevents water baths running dry, provides a detachable panel for superior ease of use from outside closed fume hoods and offers a proven vacuum seal and vapor tube system guaranteed for years of operation!
Leading safety standards
All models come with a safety heating bath with handles, pour spout, and cable coupling with protection class IP 67 to prevent short-circuiting and corrosion. The residual heat indicator also alerts you to a temperature above 50 °C when in stand-by mode. In the event of continued temperatures exceeding by > 5 °C, the heating is turned off to prevent running dry.
Superior ease of use
Simplify your day-to-day work with smart details such as a detachable panel, control knobs for direct control, the Easy-Clip for removing flasks, and the patented vapor tube. All glass accessories such as distillation spiders, evaporating cylinders, or evaporating flasks up to 5 l can be used with the universal 5 l heating bath without retrofitting.
Reduced cost of ownership
All components complement each other and are made for years of continuous operation: PTFE vacuum seals, UV resistant tubes with best chemical stability, condensate-repellent varnish,sealed housing, maintenance-free and sparkless motors. FDA compliant materials increase the range of applications without additional accessories.
Easily upgrade your Hei-VAP Core model with the digital vacuum controller for accurate vacuum control of house vacuum systems or any other valve regulated vacuum pump.
Overheat protection design that prevents water baths running dry, provides a detachable panel for superior ease of use from outside closed fume hoods and offers a proven vacuum seal and vapor tube system guaranteed for years of operation!
Leading safety standards
All models come with a safety heating bath with handles, pour spout, and cable coupling with protection class IP 67 to prevent short-circuiting and corrosion. The residual heat indicator also alerts you to a temperature above 50 °C when in stand-by mode. In the event of continued temperatures exceeding by > 5 °C, the heating is turned off to prevent running dry.
Superior ease of use
Simplify your day-to-day work with smart details such as a detachable panel, control knobs for direct control, the Easy-Clip for removing flasks, and the patented vapor tube. All glass accessories such as distillation spiders, evaporating cylinders, or evaporating flasks up to 5 l can be used with the universal 5 l heating bath without retrofitting.
Reduced cost of ownership
All components complement each other and are made for years of continuous operation: PTFE vacuum seals, UV resistant tubes with best chemical stability, condensate-repellent varnish,sealed housing, maintenance-free and sparkless motors. FDA compliant materials increase the range of applications without additional accessories.
- 3-year warranty on all devices and an average operational lifespan of 10 years.
- Multi-stage quality checks in development and production.
- Premium service according to the "research made easy" principle.
| Technical Data: | |
| Height adjustment: | 155 mm |
| Rotation speed: | 10 to 280 min-1 |
| Heating capacity: | 1300 W |
| Temperature range of heating bath: | 20 to 210 °C |
| Heating bath temperature control / accuracy: | electronic / digital / ± 1 K |
| Secondary overtemperature cut-off: | 250 °C |
| Heating bath Ø / volume: | 255 mm / 4.5 l |
| Mains supply / voltage: | 1400 W / 230 V (50 / 60 Hz) |
| Operation conditions: | 0 to 40 °C at 80 % rel. humidity |
| Condencing surface G3: Condencing surface G3XL: | 1400 cm2 2200 cm2 |
| Rate of evaporation G3 XL (l / h) ΔT* 40 °C Toluene: Acetone: Ethanol: Water: | 8.5 7.5 3.5 1.4 |
* ΔT = difference between heating bath and boiling temperature. |
- Affordable option for digital vacuum control.
- Easy fixation on the condenser shaft above the evaporator or as stand alone device with base next to the unit.
- Manual vent button to prevent bumping.
- Graphs in order to display the entire vacuum process.
- Regulation valve included within the scope of delivery.
- RS232 interface.
- Multilingual menu navigation.
- Easy installation and operation.
| Technical Data: | |
| Vacuum sensor: | integrated |
| Upper measuring limit: | 1080 / 810 mbar / torr |
| Lower measuring limit: | 0.1 / 0.1 mbar / torr |
| Measurement principle: | ceramic diaphragm (alumina), capacitive, gas indep., absolute pressure |
| Accuracy of measurement: | < ± 1 mbar / hPa / torr / ± 1 digit (after adjustment, constant temperature) |
| Ambient temperature range (operation): | 10 to 40 °C |
| Max. media temperature for continuous operation / short times: | 40 / 80 °C |
| Degree of protection: | IP 20 |
| Degree of protection of front side (also built-in version): | IP 42 |
| Dimensions (L x W x H): | 144 x 124 x 115 mm |
| Weight: | 44 kg |
| Type | For | PU | Order No. | CDC |
|---|---|---|---|---|
| Hei-VAC Control | for Hei-VAP Value / Value Digital or Advantage model | 1 | 5446271 | 1 |
| Extra Information |
| Accessories for rotary evaporators Hei-VAP series / Heidolph |
| Automatic modules Distimatic / Heidolph |
Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.