Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
 
Multi-Use USB Data Logger EBI 310 DI
ebro


Cold chain monitoring - the easy to use data loggers with USB connection monitor the temperature and / or humidity during transport and storage of sensitive goods like medicine, food, serums etc. Measurement reports are created automatically as PDF files when you connect the logger to a PC.

The EBI 300 and EBI 310 USB data loggers are suitable for multi-use.
  • Programming of the logger with the help of the free online configurator or optional via the software Winlog.basic, Winlog.light or Winlog.pro.
  • Set optional limits and start to record the measurement data.
  • Connection of the logger to any PC via the USB port.
  • Automatic generation of a PDF report with all important measurement data.
  • Store, save or email the PDF report.
  • Further processing of the measurement data with the software Winlog.basic, Winlog.light or Winlog.pro.
  • Direct USB connection.
  • Automatic PDF report generation.
  • Indication of alarm status via flashing LED.
  • Data integrity.
  • Conforms with FDA 21 CFR Part 11, DIN EN 12830 and ATP.
  • The data loggers help you to comply with GMP and VO (EG) 37/2005.
  • Digital interface between loggers and external probes (at EBI 300 TE, EBI 300 TH, EBI 310 TE, EBI 310 TH, EBI 310 DI and EBI 310 TX).
  • Data logger functions as data collector with optional internal sensor.
  • Easy exchange of the external probes e. g. for calibration: remove and send probe, connect replacement probe, measure.
  • No calibration of the data collector required, if internal probe is not used.
Storage temperature:- 40 to + 85 °C
Sample rate:1 min to 24 h
Measurement modes:endless measurement, start / stop, measurement until end of memory, start with key press
Display:value, MIN / MAX, until end of memory, alarm on / off
Max. start delay:72 h
Housing material:PC
Certificate:factory calibration certificate - 20 °C, 0 °C, + 60 °C
Norms:DIN EN 12830
Factory calibration certificate:- 20 °C, 0 °C, + 60 °C
Precise temperature measurements in dry ice. Additional battery allows usage within dry ice.
  • Internal temperature probe usable additionally.
  • Battery: Lithium button cell in the logger, lithium battery in the probe, both changeable by the user; battery life time up to 2 years, depending on application.
Technical Data:
Measurement range internal:- 30 to + 75 °C
Accuracy (internal):± 0.2 °C (- 30 to + 30 °C)
± 0.5 °C for the remaining measurement range
Accuracy (external):± 1.0 °C (- 85 to - 20 °C)
± 0.2 °C (- 20 to + 50 °C)
Probe:Pt 1000, st. steel, Ø 5 mm, L = 50 mm, blunt
Cable:PTFE, L = 60 cm, waterproof, oilproof and food safe
Resolution:0.1 °C
Dimensions (L x W x H):100 x 33 x 14 mm
Protection class:IP 65
Total memory capacity:120000 measurements
Alarm:5 ranges
PDF creation:PDF / A 1b
LED:red and yellow
Factory calibration certificate:- 80 °C and 0 °C
Druck:no
Feuchte:no
Temperatur:yes
CO2:no
Licht:no
Schutzklasse:[_18/0_]
Multi-Use USB Data Logger EBI 310 DI  ebro
Min. Messwert Temperatur internMax. Messwert Temperatur internMin. Messwert Temperatur externMax. Messwert Temperatur externAnzahl speicherbare MesswertePUOrder No.CDCPrice/Unit/EUR 
-30.0075.00-85.0050.0040000154395091on demand 

Follow us

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.