Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
Huber Kältemaschinenbau 
High-Temperature Thermostat Unistat® 80 to 425 °C
Huber


High-temperature thermostats using the unistat principal with Plug & Play technology. Minimised volume, shortest possible heating times, hydraulically closed: no oil vapour. The cooling water discharge temperature is limited to 55 °C to prevent steam from being generated during cooling at flow temperatures in excess of 100 °C. Housing and copper soldered heat exchanger made of st. steel. With adjustable overtemperature protection acc. to DIN 12876. Length of cable between machine and controller approx. 5 m.

Dynamic temperature control systems Unistat® with very good thermodynamic properties and a range of functions to meet the highest demands. They are fitted with the innovative Pilot ONE controller with a 5.7" touchscreen colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time.

Because Unistats® are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, further saving resources. Unistats® are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated.
  • Precise and reproducible temperature control results.
  • Fastest heating and cooling rates.
  • Wide temperature ranges with no fluid change.
  • Adaptive temperature control, self-optimising.
  • Powerful circulation pump, adjustable.
  • 2 x USB (Host and Device), Ethernet and RS232 interfaces.
Technical Data:
Permissible ambient temperature:5 to 40 °C
Alarm message:optic, acoustic, relay
Controller:Pilot ONE
Safety class:III / FL
Mains supply:230 V 1 ~, 50 / 60 Hz (standard voltage at delivery)
400 V 3 ~ N, 50 / 60 Hz
Heating power~kW3.0 / 9.0
Cooling capacity at 400 / 300 / 200 / 100 °C- / - / - / -
High-Temperature Thermostat Unistat® 80 to 425 °C  Huber
TypeMax. pressure pumpDimensions (W x D x H) mmPUOrder No.CDCPrice/Unit/EUR 
Unistat® TR40131 l / min, 0.9 bar288 x 379 x 890154365381on demand 
Unistat® TR40231 l / min, 1.0 bar288 x 332 x 870154365391on demand 
Accessories:
Calibration bath Cal 700 / Huber Kältemaschinenbau
Thermal fluids / Huber Kältemaschinenbau
Com.G@te and POKO / ECS interfaces / Huber Kältemaschinenbau
Control cables / Huber Kältemaschinenbau
Adjustable bases / Huber Kältemaschinenbau

Volg ons

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.