Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876

The StopCock discharge cocks fit all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers.
  • Tight-closing for complete seal.
  • Especially effortless.
  • With connecting cap nut, guaranteed vertical position of the cock.
  • Pressure-resistant up to 2 bar at 20 °C (without discharge bracket and grommet).
  • With discharge angle and rotatable spout preventing drips.
  • With tapered spout for bottles with narrow openings with a Ø from 6 to 8 mm.
  • Thread, inflowing side 3/4" inner thread cap nut.
  • Thread, outflowing side spout / nozzle.

StopCock angled:
  • Media-contacting parts PP, PE and PTFE.
  • Not suitable for solidifying substances.

StopCock PA, electroconductive:
Commercially available spigots made of the materials PE or PP cannot be used for solvents. The spigot StopCock PA is made of electrically conductive PA and therefore perfectly suitable for solvents.
  • DEKRA tested: zone 0 and 1, explosion groups II A, II B.

StopCock PA fits onto 3/4" outer threads and with the supplied adapter onto 3/4" inner threads and therefore onto nearly all commercially available canisters and barrels where the discharge thread is at the bottom.
  • Media-contacting parts PA conductive to electricity and PTFE.
  • Supplied with PA adapter conductive to electricity for 3/4" inner thread.
Gewindeno indication
DescriptionPUOrder No.CDCPrice/Unit/EUR 
StopCock angled15427844121.50Order
StopCock PA, electroconductive15429518125.30Order

Volg ons

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.