Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
 
Pump-Heads for Gear Pumps REGLO-Z, REGLO-ZS, BVP-Z, MCP-Z, MCP-Z Process
ISMATEC


To operate a magnetically coupled gear pump application specific pump-heads are required, a magnet and 2 tube connectors. There are many different pump-head models available. Permissible temperature - 45 to + 177 ºC. For pumps with Teflon® gears: Please state an operating temperature above 54 °C when placing the order.
Please note: The flow rate depends on the model.
  • Max. system pressure: 21 bar.
  • SERVICE-KITS are also available.
Gear material:
PPS:polyphenylene sulphide
G:graphite (carbon)
PTFE:polytetrafluoroethylene
Housing material:stainless steel SS 316
TypeGear materialFlow rate ml / minMax.differential pressure REGLO // BVP / MCP barPUOrder No.CDCPrice/Unit/EUR 
Z-120PTFE32 to 39502 // 3.5158283201990.86Order
Z-130PPS32 to 39502 // 5.2158283301990.63Order
Z-140PTFE32 to 39502 // 3.5158283401935.56Order
Z-142PTFE55 to 5480- // 3.5158283421940.65Order
Z-150PPS32 to 39502 // 5.2158284121940.42Order
Z-181G2.1 to 2522.8 // 2.81582841311,098.33Order
Z-183G4.2 to 5042.8 // 2.81582841411,098.33Order
Z-186G0.85 to 991.4 // 1.41582841511,046.40Order
Z-1830PPS4.6 to 5605.2 // 5.2158284181988.51Order
Z-200PPS35 to 3509- // 5.21582841611,009.26Order
Z-201PPS73 to 7241- // 3.51582841711,176.78Order
Flow rate depends on gear pump drive.

Volg ons

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.