Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
Cole Parmer 
Gear Pump Drives MCP-Z Standard and MCP-Z Process Incl. Magnet

Flow rate range 1 to 7241 ml / min.
2 drives that meet the most demanding requirements, with 20 interchangeable, magnetically coupled pump-heads for flow rates from 1 to 7241 ml / min. Pulsefree flow, up to 5.6 bar differential pressure and 21 bar system pressure.
  • Membrane key-pad and LCD display.
  • Fully programmable dispensing.
  • 4 program memories for saving individual dispensing parameters.
  • Calibratable flow rate and dispensing volume.
  • Remote control capability, PC-compatible (interface RS232).
  • Continuous duty even with differential pressure of up to 5.6 bar.
  • Wide selection of pump-heads to suit a wide range of applications.

MCP-Z Standard drive:
  • Protection rating IP 30.
  • Painted housing.
  • Mains supply: 230 V / 50 Hz, 115 V / 60 Hz, adjustable.

MCP-Z Process drive:
  • 4 program memories for PC programmed application profiles.
  • Pre-programmable by PC for process technology.
  • Protection class IP 65.
  • Dust tight and protected against water jets.
  • Stainless steel housing.
  • Corrosion resistant.
  • Mains supply 85 to 264 V / 47 to 60 Hz.
Programmable functions:ml / min
speed drive
calibratable: ml / min (flow rate), ml (volume)
drive start / stop
Dosing according to:volumes ml
volumes / time unit
dispensing time (0.1 to 999 h)
intervall dispensing by time / volumes with a pause
programming a number of dispensing cycles
Min. pump capacity~[ml/min]:1.00000
Max. pump capacity~[ml/min]:7241.00
Max. differential pressure~ [bar]:5.60
Material:no indication
Piston material:no indication
Cylinder material:no indication
Gear material:no indication
Gear Pump Drives MCP-Z Standard and MCP-Z Process Incl. Magnet  ISMATEC
TypePUOrder No.CDCPrice/Unit/EUR 
MCP-Z Standard158283101on demand 
MCP-Z Process158283091on demand 
Additional magnet for MCP-Z Standard15828344-0011on demand 
Additional magnet for MCP-Z Process158283451on demand 

Follow us

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.