Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
 
EK Immersion Coolers
Thermo Scientific


These coolers are ideal for the following applications:
  • Cool smaller volumes down to - 90 °C.
  • Remove reaction heat.
  • Replace tap water cooling.

The lowest reachable temperature depends upon:
  • The quantity of liquid.
  • The type of liquid and its viscosity.
  • The bath insulation.

Immersion Cooler EK45:
This multi-purpose cooler has its own controller with digital temperature display, reaching temperatures down to - 45 °C in a 5 l Dewar vessel. The controller enables a temperature accuracy of approx. 1 to 2 °C. Improvement is possible using a stirrer.

Immersion Cooler EK90:
As the EK45, but for temperatures down to - 90 °C. The cooling coil is flexible and can therefore be adapted to suit virtually any bath shape. The minimum Ø of the vessel to be cooled is 110 mm.
Hose length:1500 mm
EK Immersion Coolers  Thermo Scientific
TypeWorking temperature range °CCooling capacity at 20 / 0 / - 20 °C WCooling coil Ø x l mmOutside dimensions (W x D x H) mmWeight kgPower rating kWPUOrder No.CDCPrice/Unit/EUR 
EK20- 25 to + 15030081 x 145230 x 460 x 38022160156952211on demand 
EK30- 30 to + 15040081 x 195230 x 460 x 38023270156952221on demand 
EK45- 45 to + 4035081 x 195230 x 460 x 380303001569522414,033.00Order
EK90- 90 to + 4030013 x 900380 x 460 x 490607501569522315,629.00Order

Volg ons

Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.