Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
Shopping Basket| Catalogue | > | Laboratory Equipment & Appliances | > | Liquid Handling | > | Hose Pumps | > | Accessories for Hose Pumps |
| Cole Parmer |
Gear Pump Drives MCP-Z Standard and MCP-Z Process Incl. Magnet
ISMATEC
ISMATEC
Flow rate range 1 to 7241 ml / min.
2 drives that meet the most demanding requirements, with 20 interchangeable, magnetically coupled pump-heads for flow rates from 1 to 7241 ml / min. Pulsefree flow, up to 5.6 bar differential pressure and 21 bar system pressure.
MCP-Z Standard drive:
MCP-Z Process drive:
2 drives that meet the most demanding requirements, with 20 interchangeable, magnetically coupled pump-heads for flow rates from 1 to 7241 ml / min. Pulsefree flow, up to 5.6 bar differential pressure and 21 bar system pressure.
- Membrane key-pad and LCD display.
- Fully programmable dispensing.
- 4 program memories for saving individual dispensing parameters.
- Calibratable flow rate and dispensing volume.
- Remote control capability, PC-compatible (interface RS232).
- Continuous duty even with differential pressure of up to 5.6 bar.
- Wide selection of pump-heads to suit a wide range of applications.
MCP-Z Standard drive:
- Protection rating IP 30.
- Painted housing.
- Mains supply: 230 V / 50 Hz, 115 V / 60 Hz, adjustable.
MCP-Z Process drive:
- 4 program memories for PC programmed application profiles.
- Pre-programmable by PC for process technology.
- Protection class IP 65.
- Dust tight and protected against water jets.
- Stainless steel housing.
- Corrosion resistant.
- Mains supply 85 to 264 V / 47 to 60 Hz.
| Programmable functions: | ml / min |
| speed drive | |
| calibratable: ml / min (flow rate), ml (volume) | |
| drive start / stop | |
| Dosing according to: | volumes ml |
| volumes / time unit | |
| dispensing time (0.1 to 999 h) | |
| intervall dispensing by time / volumes with a pause | |
| programming a number of dispensing cycles | |
| Min. pump capacity~[ml/min]: | 1.00000 |
| Max. pump capacity~[ml/min]: | 7241.00 |
| Max. differential pressure~ [bar]: | 5.60 |
| Material: | no indication |
| Piston material: | no indication |
| Cylinder material: | no indication |
| Gear material: | no indication |
| Schutzklasse: | [_18/0_] |
| Type | PU | Order No. | CDC |
|---|---|---|---|
| MCP-Z Standard | 1 | 5828310 | 1 |
| MCP-Z Process | 1 | 5828309 | 1 |
| Additional magnet for MCP-Z Standard | 1 | 5828344-001 | 1 |
| Additional magnet for MCP-Z Process | 1 | 5828345 | 1 |
Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.