Tel: +31 (0)10 258 1870 | Support: +31 (0)10 258 1876
Shopping Basket |
A 11 basic Analytical Mill
IKA
IKA
Batch mill for 2 different grinding procedures:
- Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6.
- Cutting grinding for pulverising soft, fibrous materials with a cutting blade (not included with delivery).
- Moist and gluey materials can be pulverised by adding water.
- Incl. grinding chamber made of Tefcel (ETFE, glass fiber-reinforced) with st. steel inlet (1.4571), useful volume 80 ml (included with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamber.
- Optionally, a 250 ml grinding chamber is available.
| Technical Data: | |
| Motor rating input / output | 160 / 100 W |
| Speed (fixed): Circumferential speed: | 28000 min-1 53 m / s |
| Useful volume: | 80 ml |
| Duty cycle ON / OFF: | 1 min / 10 min |
| Overload protection: | yes |
| Max. granularity: | 10 mm |
| Dimensions (W x D x H): | 85 x 85 x 240 mm |
| Weight: | 1.5 kg |
| Mains supply: | 220 to 240 V, 50 / 60 Hz |
| Protection class acc. to DIN EN 60529 : | IP 43 |
| Type | Usable volume [µl] | Max. Drehzahl | Max. feed size | Material | PU | Order No. | CDC |
|---|---|---|---|---|---|---|---|
| A 11 basic analytical mill | 80.00 | 28000.00 | 10.00 | no indication | 1 | 5737801 | 1 |
| Manual |
Da Vinci Laboratory Solutions B.V. - T +31 (0)10 258 1870 - Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.